Menu

FAQ

Product Detail

300 °C Magnet Wire  
CITCABLE:   300 °C Magnet Wire  
   KEY PROPERTIES

Abrasion Resistance –  Poly (arylene ether) copolymer  imparts superior abrasion resistance to the wire it is covering. Both Poly (arylene ether) copolymer   insulated wire and PESK wire Poly (arylene ether) copolymer  can endure rugged environments allowing the covered wire to remain protected and to continue to function at a high level.

Chemical Resistance – Poly (arylene ether) copolymer  polymer is well-characterized for its broad chemical resistance spectrum protecting your wiring from corrosion and extending its work life.

Dielectric Strength – With its excellent dielectric strength, Poly (arylene ether) copolymer wire minimizes the motor’s susceptibility to outside electrical interference.
$50 -$50 /Piece | 10 Pieces (Min.Order)

Insulation thickness of enameled wire: 0.015,0.03,0.045,0.05,0.075+mm (formed by wrapping,
Fixed thickness), conductor diameter range: 0.25-1.02 mm (selected according to the wire gauge table)
Experimental data on accelerated aging life at a temperature of 350 degrees for project reference:
1 Using Poly (arylene ether) copolymer  (A) insulation scheme, conduct static life baking test at 350 ℃ for 4000 hours, and limit test at 450 ℃ for 2 hours (actual duration is about 8 hours). Other customers conducted static baking tests at 290 ℃ for 15000 hours
2 Using Poly (arylene ether) copolymer (B) insulation scheme, conduct static baking test at 350 ℃ for 500 hours, and limit test at 450 ℃ for 2 hours
Poly (arylene ether) copolymer insulated enameled wire  
Among them: Poly (arylene ether) copolymer  (B), with an application temperature range of 250-300 degrees Celsius, can reach 450 degrees Celsius in a short time (2 hours).
Poly (arylene ether) copolymer (B) are suitable for both military and civilian use due to their excellent cost-effectiveness.
Poly (arylene ether) copolymer (A) can be applied within a temperature range of 300-350 degrees Celsius and can reach up to 450 degrees Celsius in a short period of time (8 hours).
Poly (arylene ether) copolymer  (B) are suitable for military use due to their highest performance and high price.
Conductor diameter range: 0.10-10.02 mm (selected according to the wire gauge table)
Conductor materials: pure copper, silver plated copper, pure silver, and others

Related Products

PEEK submersible pump solenoid wire

CITCABLE:  PEEK submersible pump solenoid wire
Application:
New energy vehicle drive motor (EV-800V motor)
 PEEK FLAT Magnet wire Electric motors 
 Motor Rewind with peek insulation wire   
 PEEK wire sized 30AWG 
 PEEK lead wire 
 peek insulation wire for Motor 
CITCABLE PEEK insulated wire is available by custom order and in crystalline and amorphous; we can extrude this material in round, square. We can also provide PEEK insulated wire in stranded and other wire
 

>

FLAT PEEK Wire Cable

CITCABLE: FLAT PEEK Wire Cable  
Application:
 New energy vehicle drive motor (EV-800V motor)
 PEEK FLAT Magnet wire Electric motors 
 Motor Rewind with peek insulation wire   
 PEEK wire sized 30AWG 
 PEEK lead wire 
 peek insulation wire for Motor 




 

>

Special Motor Cable -196----+200℃

 Special Motor Cable -196----+200℃  
  Motor Lead  wire is a high-temperature wire that may be used as motor lead wire for hazardous locations. Depending on its conductor size, this wire can be rated to either --196°C to 250°C, but it has an overall voltage rating of 600V/1000V. It can also be used as a lead wire for electrical equipment in high-temperature environments. Motor Lead Wire wire performs well where Oil and fire resistance are important

Conductor: Stranded tin-plated annealed copper, conforming to ASTM B-33
Insulation: Extruded PCTFE,TPI,PEEK with overall, non-fraying, PEEK WIRE/S304 braid with a glossy high-temperature saturant finish>

PEEK enameled magnet wire

 CITCABLE: PEEK enameled magnet wire 
Application:
New energy vehicle drive motor (EV-800V motor)
 PEEK FLAT Magnet wire Electric motors 
 Motor Rewind with peek insulation wire   
 PEEK wire sized 30AWG 
 PEEK lead wire 
 peek insulation wire for Motor

CITCABLE PEEK insulated wire is available by custom order and in crystalline and amorphous; we can extrude this material in round, square. We can also provide PEEK insulated wire in stranded and other wire

 

>

PEEK FLAT Magnet wire Electric motors

 CITCABLE: PEEK FLAT Magnet wire Electric motors  
Product Construction:
PEEK insulated wires with Silver-plated or Nickel-plated conductors 
Conductor: 38awg to 6awg,
PEEK insulated OD: 0.25—10.0mm
 Key Features:
1, Working temperature:-150℃---- +260℃ ( 500°F)  
2,600V, 800V rating or 50KV 
3,Halogen free and low toxicity
4,Excellent radiation resistance
5,PEEK cable outstanding and excellent abrasion resistance, dielectric strength, chemical resistance, thermal endurance in long. protects against corrosion 

>

PEEK single copper wire for motor

 CITCABLE:peek insulation wire for Motor 
Application:
New energy vehicle drive motor (EV-800V motor)
 PEEK FLAT Magnet wire Electric motors 
 Motor Rewind with peek insulation wire   
 PEEK wire sized 36AWG --4AWG
 PEEK lead wire 
 PEEK insulation wire for Motor >

FLAT PEEK Wire Cable

CITCABLE: FLAT PEEK Wire Cable  
Application:
 New energy vehicle drive motor (EV-800V motor)
 PEEK FLAT Magnet wire Electric motors 
 Motor Rewind with peek insulation wire   
 PEEK wire sized 30AWG 
 PEEK lead wire 
 peek insulation wire for Motor >

300 degrees Magnet Wire

300 °C Magnet Wire  
CITCABLE:   300 °C Magnet Wire  
   KEY PROPERTIES

Abrasion Resistance –  Poly (arylene ether) copolymer  imparts superior abrasion resistance to the wire it is covering. Both Poly (arylene ether) copolymer   insulated wire and PESK wire Poly (arylene ether) copolymer  can endure rugged environments allowing the covered wire to remain protected and to continue to function at a high level.

Chemical Resistance – Poly (arylene ether) copolymer  polymer is well-characterized for its broad chemical resistance spectrum protecting your wiring from corrosion and extending its work life.

Dielectric Strength – With its excellent dielectric strength, Poly (arylene ether) copolymer wire minimizes the motor’s susceptibility to outside electrical interference.>